Sun Microsystems, Inc.   Sun System Handbook - ISO 4.1 October 2012 Internal/Partner Edition
   Home | Current Systems | Former STK Products | EOL Systems | Components | General Info | Search | Feedback

SunPCi IIIpro

Codename: Bellerophon Pro

Workstations: Sun Blade 150, 1500, 2500
Ultra 25, 45
Servers: Enterprise 250, 450, 220R, 420R
Sun Fire 280R

Option 2136

375-3203
3.3/5V 64Bit 33MHz

Jumper Settings

JUMPER PINS SETTING DESCRIPTION
JP1 1-2
1-2
In
Out
Hardware Reset
Normal (default)
JP2 1-2
1-2
In
Out
From HW Strapping
Strapping from Boot ROM (default)
JP3 1-2
1-2
In
Out
Diagnostics selection real
Emulate (default)
JP4 1-2
1-2
In
Out
Add-in platform (default)
Stand-alone platform
JP5 1-3 Out Unknown
J7 1-10 Out Unknown

LED Codes

Color Status
Off SunPCi powered off
Solid Green SunPCi running normally
Solid Amber System error, service required
Blinking Amber SunPCi running or booting up, but continuous
blinking indicates potential problem

Notes

  1. The minimum operating system is Solaris 7.
  2. SunPCi IIIpro ships with two optional daughter cards:
    370-6152 (USB/Firewire Backplate)
    530-3284 (Serial/Parallel Port Backplate)
    The first daughter card adds two USB ports and one IEEE1394 port.
    The second daughter card adds one Serial port and one Parallel port.
  3. Daughter Cards require adjacent slots on the component side of the SunPCi IIIpro.
  4. RS-232 signal levels are used. RS-423 is not available.

Memory Notes

  1. SunPCi IIIpro ships with one 256MB DDR SODIMM in Slot DIMM 1.
  2. Sun part number 370-5463 is the 256MB DDR SODIMM, Option 7066.
  3. Sun part number 370-5967 is the 512MB DDR SODIMM, Option 7067.

Sun Blade 150 Notes

  1. Install SunPCi IIIpro in Slot 2 for optimal cooling.
  2. Install XVR-100 in Slot 3 and SunPCi IIIpro in Slot 2 when installing these two cards.
  3. The Sun Blade 150 requires 256MB of system memory when SunPCi IIIpro is installed.

References

  1. SunPCi III Quick Installation Guide, 817-0358.
  2. SunPCi III SODIMM Installation Guide, 817-0888.
  3. SunPCi III 3.2.2 User's Guide, 817-3631.
  4. SunPCi III 3.1 User's Guide, 817-2966.
  5. SunPCi III 3.1 Product Notes, 817-2968.
  6. SunPCi III 3.0[.01] Product Notes, 817-0359.
  7. Installing Optional Hardware for the Preinstalled SunPCi III Product, 817-3276.
  8. Sun Blade 2000 and SunPCi III Cards: Installing the Required Card Guide, 817-3695.

  Copyright 2012 Sun Microsystems, Inc.  All rights reserved.
 Feedback